DJI Phantom / Remote RED Carbon Fiber Graphic Wrap Decal Skin vision plus 1 2 +

Description

DJI Phantom 1&2
RED
Carbon Fiber Graphic Wrap and Remote Control Wrap
-Please see our other listings for more color options-
Fits
Note- This skin covers up two vent slots on each side on the Phantom 2 (see picture)
DJI Phantom 1
DJI Phantom FC40
DJI Phantom 2
DJI Phantom 2 Vision / Plus
--Does NOT fit Phantom 3 (Please see other listings for Phantom 3 skin)--
-Transmitter skin will not fit the new style V3 Controller
**Decal graphic only, DJI Phantom/transmitter not included**
**The actual product may appear to be a different shade of red depending on monitor settings**
Up for sale is a precision cut carbon fiber wrap kit that applies to body and remote control of your Phantom. It adds a special custom touch to the exterior of your quadcopter. The carbon fiber vinyl used is high quality and is rated for outdoor use. It has a 3D appearance that makes it look identical to real carbon fiber.
The wrap can be removed at any time without any damage to the phantom.
Please contact me with any concerns about the product as I strive to keep my feedback positive with every transaction. Thanks!
Phantom Body Installation Instructions
-Tips-
**As a final step, it is recommended to use a hair dryer to apply light heat to the decal, to ensure it stays adhered around the contours of the shell**
·
Remove props
·
Install in an area with adequate lighting
·
Read the entire instructions before application
·
Clean the top shell of the phantom ensuring all foreign material is clear of the surface and cracks where the decal is going to be applied.
·
Start with the largest sections and end with the smallest.
-Take note that the wrap is designed to cover up 2 of the vent slots
**please contact us if you are not able to see the embedded image below**
Phantom Transmitter Installation Instructions
**Take note that the largest section of the skin has been split into two pieces to provide easier installation**
1.
Make sure
all foreign material is clear of the surface and cracks where the decal is going to be applied.
2.
Take a look on the embedded image below and take note that the arrows are pointing to the initial point on the transmitter where you should first line the decal up.
3.
Start with the largest decal section and begin applying it where the red arrow has indicated. From there work your way around guiding the decal around the body lines of the remote.
It is not a problem if you have to carefully peel back a portion of the skin to realign it.
4.
Next apply the top half of the decal as indicated in the embedded image.
Line it up with the first decal so that it has a seamless appearance.
5.
Repeat the same process to the rest of the sections of the skin. There is not an order they need to be applied in after the first and second piece are installed.
-- If you have any questions or issues installing the item feel free to contact us. –
U.S SHIPPING:
This item is shipped by USPS first class mail
INTERNATIONAL SHIPPING:
Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to purchasing the item.
Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application