Denon DP-6000 Direct Drive Turntable

Description

Denon DP-6000 turntable motor, recently recapped, works perfectly. This is a 100v model and I have a SUT that I will include.  The DP-6000, as described by Vinyl Engine:
99.998% Accurate Speed; Phase Controlled by Quartz Oscillation: The rotating speed is highly stabilised by a timing clock based on a quartz crystal oscillation which is very stable against changes of temperature or time.
By the use of Phase-locked loop method, the speed is hardly affected by load or supply voltage fluctuation.
DC Electrical Brake for Smoother Operation: Up-speeding servo function and a DC electrical brake are commanded in accordance with the speed detection data.
The result is smoother operation in speed change-over, in starting or in stopping as well as during play.
Magnetic Recording for Speed Detection: Denon established its original motor control system using magnetic recording method for speed and phase detection.
1000 pulses recorded with a high accuracy allow a high detecting frequency to expel phase lagging of the servo system accordingly over-shoot, wow and flutter therein.
Improved S/N, Wow and Flutter Performance by an AC Motor: With the introduction of pulse width modulation for motor regulation, a cleaner driving current can be applied to the motor.
This improves S/N, wow and flutter performance. This method has also reduced power consumption.
Specifications
Speeds: 33.33 and 45rpm
Platter: 1.8kg diecast aluminium, 312mm dia
Speed adjustable range: more than +-6%
Wow and flutter: 0.015% WRMS
Signal to noise ratio: 77dB or more
Brake: DC electrical brake
Motor: AC servo motor
Cosmetic condition is very good, all lights work, buttons push, etc. The platter edge has signs of age, I don't know if it could be buffed out or not. Some marks on the control panel seen in pics. Transport screws in place.  I have the receipt from the professional service done, which included "Defective components replaced on Servo/power supply circuitry, replaced all capacitors as needed. Speed lock for Normal/Variable feature re-adjusted. Perform maintenance service as required".